When something keeps disturbing the same lawn, garden bed or veggie patch from below, chasing the damage after it appears gets old quickly. This sonic ground pest repeller is designed to create recurring vibration through the soil, helping discourage ground-sensitive and burrowing garden pests from settling in the same area. The unit runs from its own solar panel, screws directly into the soil with a threaded stake, and operates without sprays, traps or external power.

Why It Stands Out
-
Ground vibration instead of surface noise — the unit is designed to send repeated vibration through the soil rather than relying only on sound above ground.
-
400–1000 Hz operating range — a low-frequency vibration/sonic range intended to disturb ground-sensitive pests.
-
Solar powered — the panel charges the built-in battery through the day, so there is no extension lead or mains connection in the garden.
-
300 mAh rechargeable battery — stores solar energy so the unit can continue operating beyond direct sunlight.
-
Threaded ground stake — screws into the soil for a firmer hold and better contact than a smooth push-in stake.
-
Compact garden profile — approximately 25.5 cm high and 6.5 cm wide, so it sits low in lawns and garden beds.
-
Non-chemical deterrent method — no poison, bait or spray is required for normal use.

What It Is Designed to Discourage
For an Australian garden, the most useful way to think about it is as a ground-vibration deterrent for areas where repeated digging, tunnelling or soil disturbance is occurring.
How the Ground Vibration Works
Once switched on, the repeller is designed to generate recurring vibration through the stake and into the surrounding soil. The principle is simple: rather than creating a visible barrier above ground, the unit makes the ground itself less comfortable for pests that rely on soil contact or underground movement.
Loose sandy soil, compact clay and heavily mulched beds can all transmit vibration differently, so positioning matters.

Where to Position It
- Lawns with repeated digging or soil disturbance
- Garden beds and borders
- Vegetable patches
- Yard boundaries
- Open soil beside sheds or fences
- Areas where the same pest activity keeps returning
For the best vibration transfer, install the threaded section into firm natural soil rather than loose mulch, gravel or a raised surface that does not make good contact with the ground.

How Far Apart to Place Multiple Stakes
Space the units up to approximately 40 ft apart, with a working diameter of around 13.12–26.25 ft per unit depending on conditions.
For a larger lawn or long garden boundary, multiple units spaced through the affected area will generally make more sense than relying on one stake at the edge.
How to Install the Threaded Stake
1. Choose a sunny area close to the pest activity.
2. Screw the threaded stake into firm soil by hand.
3. Keep the solar panel above the surrounding grass or foliage so it can receive daylight.
4. Switch the unit on.
5. If using several stakes, space them through the affected area rather than clustering them together.
6. Check the position occasionally after heavy rain, mowing or garden work.
Tip: do not hammer the top of the unit into hard ground. If the soil is very dry or compacted, loosen the spot first so the threaded stake can be installed without damaging the housing.

Solar Charging and Everyday Use
The integrated solar panel charges the internal 300 mAh nickel-cadmium battery during daylight. For the best charging performance, keep the panel free from shade, grass clippings and dirt.
Because solar performance follows available sunlight, runtime can vary with weather, season and placement. A stake positioned in open sun will generally charge more effectively than one installed under dense shrubs or beside a shaded fence.
Care and Maintenance
- Wipe dust and dirt from the solar panel regularly.
- Keep grass from growing over the panel.
- Check that the threaded stake remains firmly seated in the soil.
- Avoid forcing or hammering the housing during installation.
- Inspect the unit after heavy rain or garden maintenance.
Specifications
| Product type |
Solar sonic ground pest repeller / vibration garden stake |
| Operating method |
Ground vibration and sonic output |
| Frequency range |
400–1000 Hz |
| Power source |
Solar |
| Battery |
300 mAh nickel-cadmium rechargeable battery |
| Installation |
Threaded ground stake |
| Recommended spacing |
Up to approx. 40 ft apart |
| Working diameter |
Approx. 13.12–26.25 ft |
| Material |
ABS |
| Size |
Approx. 25.5 × 6.5 cm |
| Recommended areas |
Lawn, garden beds, veggie patches, yard boundaries and other soil areas |
| Chemicals required |
No |

What’s Included
- 1 × Solar Ground Vibration Pest Repeller Stake